SKILLSYSTEMS SF
SK-SF-001
$
19.99
$
All fans manufactured by SKILLSYSTEMS are created using SKILL-bearing technology, which is based on double ball bearings with ceramic coating, which significantly increases the cooling service life and allows the system to be used 24/7.
With support for speeds from 800 to 1800 rpm and PWM technology, you can easily and flexibly configure the map of temperature / rpm.
For maximum connection ergonomics, our fans are equipped with four connectors simultaneously: PWM IN / Molex (4pin) IN / Molex (4pin) OUT / PWN OUT, which will allow you to connect up to 10 fans in series.
With support for speeds from 800 to 1800 rpm and PWM technology, you can easily and flexibly configure the map of temperature / rpm.
For maximum connection ergonomics, our fans are equipped with four connectors simultaneously: PWM IN / Molex (4pin) IN / Molex (4pin) OUT / PWN OUT, which will allow you to connect up to 10 fans in series.
QUALITY AND SAFETY
All fans manufactured by SKILLSYSTEMS are created using SKILL-bearing technology, which is based on double ceramic-coated ball bearings, which significantly increases the life of the cooling system and allows you to use the system in 24/7 mode.
QUALITY AND SAFETY
All fans manufactured by SKILLSYSTEMS are created using SKILL-bearing technology, which is based on double ceramic-coated ball bearings, which significantly increases the life of the cooling system and allows you to use the system in 24/7 mode.
800-1000 RPM
A powerful motor and a separate PWM speed control board allow maximum flexibility in setting the speed map depending on temperature sensors in the range from 800 to 1800 rpm. Smart chip system SKILLSYSTEMS supports both PWM and DC speed control.
SKILL-bearing TECHNOLOGY
Thanks to the use of a cooling system with SKILL-bearing technology, double ball bearings and ceramic coating of moving parts, SKILLSYSTEMS power supplies work reliably 24/7 for years.
MAXIMUM VARIABILITY
The maximum set of connectors for connecting SKILLSYSTEMS fans gives you absolute freedom in designing your cooling system. SKILLSYSTEMS fans support up to 10 fans from a single PWM connector on the motherboard, with support for speed control all of them without any additional devices, or up to 50 fans using a Molex(4-pins) In / Out connectors.
HIGH PRESSURE AND AIRFLOW
Aerodynamic characteristics have allowed us to achieve the perfect balance of flow and high air pressure.
LOW LEVEL NOISE
Using only high-quality power circuits, heatsinks and SKILL-bearing cooling system resulted in a significant reduction in noise compared to standard power supplies of the same capacity.
RGB LIGHTNING
RGB lighting from SKILLSYSTEMS will make your system look beautiful, stylish and powerful.
Specifications
Number of models: 10
Backlight: RGB or blue, depending on the model
Speed: 800-1800 RPM
Noise level: 23 dB
Bearing type: SKILL-bearing, based on double ceramic-coated ball bearings
Connection ports: 4 ports - PWM IN / Molex(4pin) IN / Molex(4pin) OUT / PWN OUT
Air flow: up to 41CFM
Air pressure: 1.2 mmH2O [Max.]
Voltage: 12V Current: 0.8 A
Dimensions: 120x120x25mm
Backlight: RGB or blue, depending on the model
Speed: 800-1800 RPM
Noise level: 23 dB
Bearing type: SKILL-bearing, based on double ceramic-coated ball bearings
Connection ports: 4 ports - PWM IN / Molex(4pin) IN / Molex(4pin) OUT / PWN OUT
Air flow: up to 41CFM
Air pressure: 1.2 mmH2O [Max.]
Voltage: 12V Current: 0.8 A
Dimensions: 120x120x25mm
Gallery